关于隔离墩模具你不知道的事

建信模具

隔离墩模具的介绍是从现在说起的，隔离墩模具作为公路主要使用的钢模板，其规

格大小基本上都是一致的，个别出入的地方就是长度、厚度、宽度的不同，形态都

是上小下大的。关于隔离墩模具的介绍是经过长时间的信息积累而来的，而根据隔

离墩预制块的具体种类以及规格，可以分为小型隔离墩以及大型隔离墩，两种模板

的设计定制也是有所区分的，比如小型隔离墩预制块的生产基本上模具外部不用携

带翻转边就可以操作，但是大型的，长度超过1米的隔离墩模具，需要设置翻转边，

这样脱模才比较容易。


隔离墩模具具有强度高、重量轻、韧性强、光良度高等特点,并成功完成了市政建设

美化环保的完整性,统一性,协调性。可日脱模2-3次,远远高于塑料模具,而且使用年

限长于塑料模具,如果有良好地养护,存放条件,使用寿命会在平常的使用寿命2-3倍

之上,所以,要做好人行道隔离墩模具的维护。



The introduction of the isolation pier mold is from now on. As the steel

formwork mainly used by the highway, the specification and size of the

isolation pier mold are basically the same. The individual access places

are different in length, thickness and width, and the shape is small at

the top and large at the bottom. The introduction of the isolation pier

mold is based on long-term information accumulation. According to the

specific types and specifications of the isolation pier precast block, it

can be divided into small isolation pier and large isolation pier. The

design and customization of the two kinds of formwork are also different.

For example, the production of small isolation pier precast block can be

operated without turning edges outside the mold, but large ones, For the

mold of isolation pier with a length of more than 1m, the turnover edge

needs to be set, so that demoulding is easier.




The isolation pier mold has

the characteristics of high strength, light weight, strong toughness and

high gloss, and has successfully completed the integrity, unity and

coordination of beautification and environmental protection of municipal

construction. It can be demoulded 2-3 times a day, which is much higher

than the plastic mold, and the service life is longer than the plastic

mold. If there are good maintenance and storage conditions, the service

life will be more than 2-3 times the normal service life. Therefore, it

is necessary to maintain the sidewalk isolation pier mold.

前进前进！！

顶了！！

微泗洪主播Coco

顶起~